Why You Need Blackout Shades in Port Orchard on Runners

When you get traditional blackout shades in Port Orchard, you’ll quickly realize there’s a problem. To prevent the material catching on the window frame, there’s a small gap either side of the material. This means a little bit of light shines through.

You need to get blackout shades that sit on runners. They cost a bit extra, but here’s how you’ll benefit.

They Get Rid of That Light

The main reason to get blackout shades in Port Orchard on runners is to get rid of the gaps. The shade fits within the runners, which sit on either side of the window frame. The runners have about an inch or two of material that would cover where the gap would usually sit.

You immediately take care of that gap problem. There’s no need to worry about the light shining through.

Blinds on runners can also help to get rid of light at the bottom of the window, too. Depending on the type of blackout shade, you may not pull it all the way to the bottom of the frame. This can leave a bit of light shining through the bottom. On a runner, you pull it all the way down and get rid of all light so the blinds are as effective as possible.

You Get Cordless Blackout Shades in Port Orchard

Blackout shades tend to go into a child’s bedroom. You want to ensure you have something that is safe for them. There’s a move into cordless shades, which is something that shades on runners offer.

Instead of pulling up and down on a cord, you push a button within the shade and pull up and down. The whole system moves on the runners at the side of the window.

Without the cords, you get rid of the strangulation risk. You can sleep soundly knowing that your children can’t accidentally get hurt because they don’t know the danger of the cords.

They Can Help Manage Temperatures in the Room

Blackout shades in Port Orchard are great for managing temperatures. The material helps to block the heat loss in the winter and manage the UV rays shining through in the summer. However, the gaps can cause a problem.

If you’re getting light through the gaps, you can guess that you’re getting UV rays. You’re also leaving a gap for the heat to escape during the winter. The runners are a thick, usually metal material that creates an extra block from the heat loss.

You can often find that thermal cellular shades are used for blackout reasons and are usually on runners. They offer the extra benefits of circulating the air back in the direction it came to offer more temperature benefits.

This can also offer the benefit of noise reduction. The gaps allow sound to pass through, so you want to look for ways to get rid of that.

It’s time to look at blackout shades in Port Orchard on runners. They will cost a little extra money, but they’re worth it for peace of mind and comfort.