You’ll probably get a cornice in Tumwater to hide the hardware of your window coverings. That’s the most common reason for this beautiful addition at the top of the windows. However, you may look at the way others have done their cornices to see there’s light coming from them.
Is it possible to add lights to your cornices? Can you hide the light fixtures with the wooden material? Here are some things to consider, but the simple answer is “yes.”
You’ll Need Space Behind the Cornice in Tumwater
In a lot of cases, it is going to be possible to hide your lights behind your cornices. The material is usually added away from the wall, with enough space to add the hardware for your window coverings. With this in mind, there’s usually space for lights behind the wood.
However, you’ll need to look at the exact amount of space you have. The hardware could take up all the space, meaning there isn’t enough room for the lights. This is something you’ll need to pay attention to when it comes to installing everything. If you want lights, you may need your cornices to be a little further out or longer to create space for the lights with the hardware.
If you don’t have any rods or other hardware from window coverings, you’ll have more space to work with the lights in the cornice in Tumwater. This is a great way to create that spotlight or hidden light effect.
You will still need plenty of space to counter the heating of the lights. You don’t want the heat to damage the cornice, the hardware, or the wall.
Avoid a Cover on Your Cornices
You may be tempted to get a box-style cornice in Tumwater. This has a cover over the top, so the only space is at the bottom, allowing you access to the hardware behind the cornice. You want to avoid these when it comes to adding some lights.
You may want your lights to face down, creating a spotlight on the windowsill. However, this isn’t going to give you the best light for the whole room. You’ll want the light to shine up to the ceiling for this, which means getting rid of that layer at the top of the cornice. Instead, you just have the three sections from the wall and across the front.
If you are working with a spotlight on the windowsill, the top layer isn’t all that problematic. However, there is heat from the lights, so keeping the top layer off could be beneficial for allowing the heat to escape.
Adding lights to a cornice in Tumwater is a great idea. You can still gain light for the room, or you can create a spotlight for your windowsill. The best thing is you don’t need fancy light coverings as the cornice will hide it all. Now you just need to make sure the lights will fit behind the cornices without causing problems for your hardware or your walls.