4 Top Tips for Installing Decorative Shutters in La Grange

You’ve decided on getting shutters in La Grange. This is a great choice, especially when it comes to adding value to your home. Whether you’ve chosen bar, California, plantation, or even colonial shutters, you’ll want to make sure they’re installed correctly. Here are four top tips to do it well to make your shutters look beautiful from the start.

Remove Old Shutters Carefully

Chances are you’re replacing current shutters. If that’s the case, make sure you remove them carefully. The last thing you want to do is damage the woodwork, which will lead to sanding down and changing the size of shutter you’ll need.

Some shutters in La Grange will have been installed with fasteners. These can be trickier to remove than other options but they’re no impossible Shear behind or snip the shutter and then cut off the fastener from the shank. You can also use a hacksaw if you can’t get shears behind.

Once you’ve finished, you’ll need to decide how your new shutters will be installed. Are you using the original fastener holes? If not, remember to fill with silicone to avoid moisture, insects, and other problems within the holes.

Measure the Window Not the Shutters in La Grange!

While the original shutters may have looked to fit well, that may not be the case. You always want to measure the window and not the shutters. This will help to take care of any section of the window that did need sanding down should something have happened. You’ll also need to take into account different placement or different styles of shutters.

Mark Shutter Holes Before Drilling

This may sound like common sense, but you’ll be surprised at the amount of people who don’t do it! Before you install your decorative shutters in La Grange, know where they are going to sit. Mark the screw position, while holding the shutter in place.

If your shutters are longer than 55”, you’ll need to make sure you add extra screws in the middle. Mark these on before you start drilling.

Place the shutters on a workbench or other flat surface and then drill the holes through the marked sections. Always work with a smaller drill bit than the screw to make sure the shutters are secure when put in place.

Get a Second Person to Help You Install

Shutter installation will always be a two person job. You’ll need to get someone to mark the drilling sections while the other holds the items against the wall.

One of the best things you can do is hire someone to install for you. Getting a professional makes sure it’s all done right. If you’re not going to hire a professional, at least get a friend or family member to help get your decorative items in place.

When installing shutters, take your time. These are designed to last a life time and the last thing you want to do is break the vinyl or cause mold growth in the fastener holes. Follow the above tips and you’ll have beautiful decorative shutters in La Grange throughout your home.