Can You Hang Door Blinds in Bellingham Without Drilling

You may want to do as little damage to doors and walls as possible, especially if you are renting. At the same time, you want good quality door blinds in Bellingham. The big question is whether you can get them without drilling into the doors or walls.

A lot of the best window blinds for the doors will sit just above them or they need to be drilled into the frame. However, there may be options depending on the type of patio door you have.

Tension Rods Could Work for Sliding Doors

If you need sliding door blinds in Bellingham, you’ll want to consider getting tension rods. They work much like your shower curtain. The rod sits within the frame of the doorway, and it is held up by tension either side. You need to make sure the rod is secured tightly as there is a risk of it falling down under the weight of the curtains.

And it is usually curtains or drapes that you will place on the tension rods. You are limited in the style of blinds that you can choose because you need something that sits on the rod.

If you have French doors or something similar that opens inward, you’ll want to avoid tension rods. The rods are likely to get in the way of the opening and closing of the door. If you don’t have a clear frame around the door, you’ll find that tension rods don’t quite work.

Use Smaller Pins for the Window Coverings

Another option is to look into door blinds in Bellingham that use small pins. They are great for lighter options, such as sheer curtains or blinds. You can even use them for all types of doors, including French doors. In fact, pins for French doors are perfect as you can put the blinds straight into the small window section and not get in the way of the opening mechanism of the door or the handle.

The downside is the pins only handle some of the lighter window covering options. You are also still making some marks in the door, albeit small ones that are unlikely to be seen when you take them down.

You are limited in your options of window coverings, still. What if you want something like vertical blinds or shutters?

Look at Getting Mounting Strips

There is another option to consider for door blinds in Bellingham before drilling. Look into getting mounting strips. These are like the sticky hooks that you can get for door hangers, but you’re getting something that is more like double-sided tape to put the blinds over the top of the doorway.

You can add any type of blind you want for this. It’s important to use enough mounting tape to do this, and you will need to be aware of the quality of the paint behind it. Sometimes, the paint comes off when you remove the tape.

You don’t need to drill to put up door blinds in Bellingham. There are a few options, but they’re not as sturdy as drilling into the frames.