How to Manage Curtain Panels in Buffalo When Furniture Is By the Window

When you set up your window coverings, you need to think about anything that could obstruct them. Curtain panels in Buffalo look great, and they offer some excellent insulation benefits. If you have furniture in the way, though, you can end up minimizing the benefits that they do offer.

The good news is you can still manage with curtain panels with furniture by the window. It’s all about forward planning and strategic positioning. Here’s how to manage the panels.

Put the Panels on One Side

You could opt for a singular panel, but if you do have double curtain panels in Buffalo due to the width of the window, you could opt for pushing the panels all the way to one side. This is asymmetric, and it can lead to some feelings of discomfort just because it’s not the way you would usually see curtain panels, but you will get used to it.

The benefit here is that you can have furniture on one side of the window without worrying about the curtain panels getting caught. You pull them on from one side of the window, and you can still gain all the benefits. It’s easy to tuck a small bit of material behind the furniture when the curtains are in use rather than trying to put the whole panel of material behind there.

Opt for Shorter Curtain Panels

If you’re in the process of buying your curtain panels in Buffalo, consider getting something shorter. A lot of people will immediately jump to full-length curtain panels, but you don’t need them. If the furniture is in the way, you can get something shorter that will just reach the bottom of the windowsill. As long as the glass of the window is covered, your curtains are doing their job.

This is great for kitchens and offices. You can also benefit in some dining areas and living rooms. The downside is that the curtains just don’t look right. You can also make the room look a little smaller than it really is due to the way the material sits.

Keep the Furniture Slightly Off the Wall

You actually want to keep the furniture away from the wall anyway. This is especially important if you’re up against an outside wall. You need space for the air to circulate and move around. If you have furniture up against the wall, there’s a higher risk of mold forming. This is great for your curtain panels in Buffalo.

With the furniture pulled away from the wall, the curtains will slip behind it. This allows you to have the style of panels that you want, and you can sit them on either side of the window. You only need a gap that’s a couple of inches off the wall, so you’ll barely notice the difference.

You can use curtain panels in Buffalo, even with furniture that is by the window. It’s a case of figuring out how to make it all work without having to replace your furniture or move everything around the room.