4 Steps to Choose Sliding Door Blinds in Tacoma That Fit Perfectly

While sliding doors look great and are practical, they do come with some downsides. One of those is finding window coverings that fit. You need specific sliding door blinds in Tacoma, so they don’t get in the way when opening and closing the door.

There are some excellent options available. Now it’s time to make sure they fit your doors perfectly. Here are four steps to do that.

Measure and Measure Again

You’ll hear when it comes to gardening to measure twice and cut once. You’re not cutting anything for sliding door blinds in Tacoma, but you still want to follow the “measure twice” part of the rule. You should get the same measurement when you do this.

If you don’t get the same measurement, you’ll need to start again. The last thing you want is to end up guessing which of the two measurements was right. Measure twice again, discarding the previous measurements. This way you’ll make sure you get it right.

Measure for the Blind Type

When you are measuring, make sure you have the type of blind in mind. You’ll specifically want to think about whether you have one long blind or if you’re opting for multiple sliding door blinds in Tacoma to work together.

If you’re getting two blinds, you’ll need to measure a little differently. Instead of the full length of the window, you’ll need to measure to the halfway points.

And think about where the mounting will start from. That brings us onto the next point.

Know the Mounting for Sliding Door Blinds in Tacoma

You will need to look at how you’re mounting the blinds to the door frame. In some cases, you may opt for an inside mount. This is placed on the inside of the sliding door frame, so everything will remain contained within. This can be okay for some doors, but you may find your blinds get in the way.

Most people will choose to mount on the outside. These are placed a little above the door frame, so the length is going to be longer than it would if you got the inside mounted options. Make sure you measure from where the mount is being placed and not just the length of your doors.

Decide on the Type of Blinds

You’ll need to look into the options for sliding door blinds in Tacoma. This is going to affect the mounting and the measurements, so you’ll want to look into this as soon as possible.

Look at the type of doors you have. Then you can figure out which types of blinds are going to work for your doors. In many cases, you’ll want to work with vertical blinds. They’re just the simplest to fit around the sliding door and not get in the way of the mechanism.

Now you’re ready to start ordering your sliding door blinds in Tacoma. You just need to decide whether you’re going to install everything yourself or pay for a professional to do this work for you.