5 Tips for Cleaning Your Metal Venetian Blinds in Bremerton

Metal Bremerton venetian blinds can be beautiful additions to the home. They’re easily affordable, offer a range of lighting and heat benefits, and are practical for all rooms. However, they will need cleaning. Sometimes, they just need a quick dusting, but they can also need a full deep clean. Here are five tips for cleaning your metal venetian blinds.

1. Start by Removing the Dust

The first port of call is to get rid of the dust and find any problematic spots. Use a duster and then spray with some window cleaner. Use a cloth or paper towel to clean the dirt and grime off. This will help you find any stubborn stains or dirty sections. The bottom of the blinds can be difficult because of small sticky hands grabbing onto the slats.

You’ll need to make sure you do this when the blinds are open and when they’re closed, as you’ll see different problem spots.

2. Use Gloves to Run Over the Slats

Make sure you have gloves on when you do the cleaning. This helps to avoid streaks being left behind on your metal venetian blinds in Bremerton. You’ll also protect your hands from any of the products that you use and from the warm soapy water for the next stage of the cleaning process.

3. Remove the Blinds and Lay on a Firm Surface

Now it’s time to get the blinds down, if you can. If you can’t remove the blinds then you’ll need to use a vacuum cleaner to get rid of the stubborn sections. You’ll also want to place your hand behind one of the slats as you clean it to get rid of stubborn stains.

If you can remove the blinds, lay them down on a clean, solid surface. Your dining table will be perfect for this. You can then rub firmer into the metal slats to get rid of all the stains. Don’t forget to turn the metal Bremerton venetian blinds to clean the side that is on show to the outside world.

4. Use Soapy Water for Removing the Stubborn Stains

You don’t need any harsh chemicals to clean your venetian blinds. Grab some dish soap and add to some warm water. Use this directly on the metal. The great thing about the material is that it won’t become moldy or damaged from the use of the warm water.

If it’s a sunny day, you could even consider doing this out on your patio or by hanging the blinds on nails on your fence.

5. Submerse into the Bathtub for a Deep Soak

If you’ve still not been able to get the stains off your metal venetian blinds in Bremerton, you’ll need to deep clean. This means adding some dish soap to bath water and submersing your blinds directly in. Leave for about 30 minutes and then pull out to scrub off the stubborn stains.

Now you’re ready to hang up your Bremerton venetian blinds again. They’ll look as good as new.