How to Let in Winter Light with Blinds in Oakleaf Plantation
While you want to gain privacy in the home, during the winter, you also want to let the light in. You need light to feel more positive as the days get shorter. This is pretty simple with blinds in Oakleaf Plantation.
Blinds are excellent for blocking light. When used properly, you’ll get all the light you need during the day and then the privacy on a night. Here’s how to use your blinds the best in the winter.
Open Up the Blinds in Full
Start by considering opening the blinds in Oakleaf Plantation in full. You want to pull the slats all the way up to the top of your windows. If you have vinyl blinds, you won’t even have slats. The open status of the blinds is with the material all the way to the top.
You want that window fully clear. This allows all the natural light to shine through the window. You will get the UV rays as well, but this isn’t a problem in the winter. The UV rays are on a lower level than in the summer, which helps to keep damage and heating problems to a minimum. Plus, in the winter, you want to get the heat during the day.
On the cloudy days, you don’t even have to worry about UV rays. You need the open window pane to make sure you can get as much natural light into the home as possible. It’s not all that easy on cloudy winter days.
Twist the Slats on Sunny Days with Snow
If you have snow or any sort of water on the ground, you’ll want to keep the blinds in Oakleaf Plantation down. To get the light in, you need to manage with the slats.
The sun is going to hit the ground and cause a reflection. This then leads to more glare than you would like in your home. It can be uncomfortable to sit near the window because of the glare that’s coming off the ground. This is more common with a snowy landscape than just a wet one. There’s a reason skiers wear tinted goggles.
Just twist the slats a little. The aim is to block the glare from the ground coming in. You’re not blocking all the natural light shining through the window.
Sit the Slats Parallel to the Ground
If you don’t want your blinds in Oakleaf Plantation completely open, you’ll need to think carefully about how the slats will sit to get the light in. You need to sit the slats parallel to the ground. The only time this differs is if you’re blocking the glare from the ground.
When you sit the slats parallel, you’re keeping them as open as possible. This allows in as much light as you can get through the windows, reducing the issues of winter darkness. Once the sun has gone down, it’s time to close up the slats.
You can allow light into your home during the winter, even when you have blinds in Oakleaf Plantation. Just set your blinds just right to manage the lower levels of light and the glare from the ground.
